Installing Windows Server On A Single System Manually - Oracle Server X5-2 Installation Manual

Installing Windows Server on a Single System Manually

7. From the Supported OS drop-down list, select the Windows Server OS.
In the Current BIOS mode portion of the screen, select the BIOS mode (UEFI or
8.
Legacy BIOS) that you want to use for the OS installation.
In the Select Your Install Media Location portion of the screen, select the
9.
location of the installation media.
This is the location of the OS distribution media. The options are CD/DVD and Network.
Note -
installs.
Click Installation Details.
10.
The Installation Details dialog appears.
11. In the Installation Details dialog, deselect any items that you do not want to
install and click OK.
Note -
recommended Drivers options are mandatory and cannot be deselected.
12. At the bottom of the Operating System Installation screen, click the OS Install
button.
13. Follow the prompts until the installation is finished.
The server boots.
Installing Windows Server on a Single System Manually
This section provides instructions for installing the Windows Server 2012 and 2012 R2 (64-bit)
operating systems.
"Install Windows Server 2012 or 2012 R2 Manually Using Local or Remote
■
Media" on page 39
"Install Windows Server 2012 or 2012 R2 Using PXE Network Boot" on page 59
■
38 Oracle Server X5-2 Installation Guide for Windows Server Operating Systems • April 2016
Oracle System Assistant does not support Preboot eXecution Environment (PXE)
In the Installation Details dialog, the Install Microsoft Windows Server and Use Oracle