Set The Boot Mode - Oracle Server X5-2 Installation Manual

Installation guide for windows server operating systems

Hide thumbs Also See for Server X5-2:

Table of Contents

Set the Boot Mode

Note -

Press the F9 key to automatically load the optimal default settings.

A message appears prompting you to continue this operation by selecting OK or to cancel this

operation by selecting CANCEL.

In the message, highlight OK, and then press Enter.

To save your changes and exit the BIOS Setup Utility, press the F10 key.

Alternatively, you can select Save and Exit from the Exit menu.

Set the Boot Mode

The server is equipped with Unified Extensible Firmware Interface (UEFI), which supports

both Legacy BIOS and UEFI boot modes. Legacy BIOS Boot Mode is enabled by default.

Because the Windows Server 2012 and 2012 R2 operating systems support both Legacy BIOS

Oracle Server X5-2 Installation Guide for Windows Server Operating Systems • April 2016

The BIOS Setup Utility screen might take a while to appear. Please be patient.

Table of Contents