Set Up a Fibre Channel Storage Area Network Device as the Installation Target
Set Up a Fibre Channel Storage Area Network
Device as the Installation Target
1.
Ensure that the PCIe host bus adapter (HBA) is properly installed in the server.
For information about installing a PCIe HBA option, refer to
Oracle Server X5-2 Service
2.
Ensure that the storage area network (SAN) is installed and configured to make
the storage device visible to the host on the server.
For instructions, refer to the documentation supplied with the Fibre Channel HBA.
Windows OS Installation Options
For single-server OS installations, Oracle System Assistant is recommended. For multiple-
server OS installations, Oracle Enterprise Manager Ops Center is recommended. The scope of
this document is for single-server OS installations. The table below provides some information
about these two installation options.
Option
Multiple servers
Single server
For more information about single-server OS installation methods and Oracle System Assistant,
see:
"Single-Server Installation Methods" on page 21
■
"Oracle System Assistant Overview" on page 22
■
20
Oracle Server X5-2 Installation Guide for Windows Server Operating Systems • April 2016
Manual.
Description
You can use Oracle Enterprise Manager Ops Center to install an OS on multiple servers, For
information, go to http://www.oracle.com/technetwork/oem/ops-center/index.html.
Install an OS to a single server using one of the following methods:
■ Locally: Perform the OS installation locally at the server. This option is recommended if you
have just completed the physical installation of the server in the rack.
■ Remotely: Perform the OS installation from a remote location. This option uses the Oracle
ILOM Remote System Console Plus application to access Oracle System Assistant or to
perform a manual OS installation.
Note -
Oracle recommends the use of Oracle System Assistant for single-server OS
installations.
"Servicing PCIe Cards (CRU)" in