Siemens SINAMICS G120 Installation Manual page 61

Connections for frame sizes FSD ... FSG
You must remove the covers from the con-
nections in order to connect the line supply,
braking resistor and motor to the converter.
In addition, for frame sizes FSD and FSE,
release the two terminal screws on the
connections for the motor and braking re-
sistor, and remove the dummy plug.
For frame sizes FSF and FSG, you must
breakout the openings from the connection
cover for the power connections. Use side
cutters or a fine saw blade.
FSD, FSE: Remove the lower cover
Power Module PM240-2
Hardware Installation Manual, 01/2020, A5E33294624B AL
4.2 Connecting the line and motor cable at the converter
FSD ... FSG: Remove the top covers
FSF, FSG: Remove the lower cover
Connecting
59