Siemens SINAMICS G120 Installation Manual page 15

NOTICE
Overheating due to inadmissible mounting position
The device may overheat and therefore be damaged if mounted in an inadmissible position.
• Only operate the device in admissible mounting positions.
Unrecognized dangers due to missing or illegible warning labels
Dangers might not be recognized if warning labels are missing or illegible. Unrecognized
dangers may cause accidents resulting in serious injury or death.
• Check that the warning labels are complete based on the documentation.
• Attach any missing warning labels to the components, where necessary in the national
• Replace illegible warning labels.
NOTICE
Device damage caused by incorrect voltage/insulation tests
Incorrect voltage/insulation tests can damage the device.
• Before carrying out a voltage/insulation check of the system/machine, disconnect the
Unexpected movement of machines caused by inactive safety functions
Inactive or non-adapted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
• Observe the information in the appropriate product documentation before
• Carry out a safety inspection for functions relevant to safety on the entire system,
• Ensure that the safety functions used in your drives and automation tasks are adjusted
• Perform a function test.
• Only put your plant into live operation once you have guaranteed that the functions
Note
Important safety notices for Safety Integrated functions
If you want to use Safety Integrated functions, you must observe the safety notices in the
Safety Integrated manuals.
Power Module PM240-2
Hardware Installation Manual, 01/2020, A5E33294624B AL
WARNING
language.
devices as all converters and motors have been subject to a high voltage test by the
manufacturer, and therefore it is not necessary to perform an additional test within the
system/machine.
WARNING
commissioning.
including all safety-related components.
and activated through appropriate parameterizing.
relevant to safety are running correctly.
Fundamental safety instructions
1.1 General safety instructions
13