System Conception - YASKAWA VIPA IM 053IP Manual

VIPA System SLIO

2.2 System conception

Overview
Components
CPU
HB300 | IM | 053-1IP00 | GB | 13-50
System SLIO is a modular automation system for assembly on a
35mm mounting rail. By means of the peripheral modules with 2, 4 or
8 channels this system may properly be adapted matching to your
automation tasks. The wiring complexity is low, because the supply of
the DC 24V power section is integrated to the backplane bus and
defective modules may be replaced with standing wiring. By deploy-
ment of the power modules in contrasting colours within the system,
further isolated areas may be defined for the DC 24V power section
supply, respectively the electronic power supply may be extended
with 2A.
n CPU (head module)
n Bus coupler (head module)
n Periphery modules
n Power modules
n Accessories
CAUTION!
Only modules of VIPA may be combined. A mixed opera-
tion with third-party modules is not allowed!
With a CPU, CPU electronic and power module are integrated to one
casing. As head module via the integrated power module for power
supply the CPU electronic is supplied as well as the electronic of the
connected periphery modules. The DC 24 power section supply for
the linked periphery modules is established via a further connection at
the power module. By installing of up to 64 periphery modules at the
CPU, these are electrically connected, this means these are assigned
to the backplane bus, the electronic modules are power supplied and
each periphery module is connected to the DC 24V power section
supply.
CAUTION!
CPU part and power module of a CPU may not be sepa-
rated! Here you may only exchange the electronic module!
Basics and Assembly
System conception
9