PG9602™ OPERATION AND MAINTENANCE MANUAL
1.3.2
Remote Electronics Module (REM) Rear Panel
The PG9000 Remote Electronics Module houses all working electronics (processor, sensor
and communications) for the PG9000 in addition to sensors for ambient conditions
(temperature, pressure and humidity).
COM 2 (RS232) – External
Barometer, External Vacuum
Gauge and Pass through
Communication
COM 3 (RS232) – Automated
Pressure Generation/Control
Component
1.3.3
Base Rear Panel
The PG9000 Platform rear panel provides the communications connection to the PG Remote
Electronics Module, Test port connection, a vacuum vent port connection, and connections for
the option Automated Mass Handler.
© 2011 Fluke Calibration
PG DRIVER – 15 pin Cable to
PG Base
ATM Connection (Barometer)
Mounting Post PRT Connector to
PG Remote Electronics Module
TH Probe Connector
COM 4 (RS232) – Pass Through
Figure 3. PG9000 Remote Electronics Module Rear Panel
Figure 4. PG9602 Base Rear Panel
8
Page
COM 1 (RS232) – Remote Host
Communications
IEEE-488 – Remote Host
Communications
AMH Connection
Connector for 25 pin Cable to PG
TERMINAL
PG Driver – to PG Remote
Electronics Module
AMH Connection
AMH Vent Port
TEST Pressure Port
AMH Drive Pressure Port
PRT Connector – to Remote
Electronics Module