DEUTSCHMANN AUTOMATION UNIGATE CX-CANopen-(Mapping) - PROFIBUS DP Instruction Manual page 40

CANopen®
• Init Object Table
• Create Object
•
Set PDO Communiction
• Set PDO Mapping
• Write Object
• Read New CANopen
• Emergency Message
The software does not support default objects, as at CANopen
40
®
Object Data
Fieldbus-Gateway UNIGATE
Deutschmann Automation GmbH & Co. KG
®
V3.
®
CX C4Map - PROFIBUS V. 1.0 28.9.20