Error Handling At Unigate ® Ic2 - DEUTSCHMANN AUTOMATION UNIGATE IC2 - Fast Ethernet Instruction Manual

Error handling at UNIGATE® IC2
10 Error handling at UNIGATE
A distinction can be made between two categories of system-errors:
Serious errors (1-4): In this case, the Gateway must be switched off and switched back on again.
If the error occurs again, the Gateway must be exchanged and returned for repair.
Warnings (6-15): These warnings are displayed for one minute simply for information purposes
and are then automatically reset. If such warnings occur frequently, please inform After-Sales
Service.
The system-error can be read-out via the Script.
In the configuration mode these displays are not valid and only meant for internal use.
Error no. Error description
0 Reserved
1 Hardware fault
2 EEROM error
3 Internal memory error
4 Fieldbus hardware error
5 Script error
6 Reserved
7 RS-transmit buffer overflow
8 RS-receive buffer overflow
9 RS timeout
10 General fieldbus error
11 Parity-or frame-check-error
12 Reserved
13 Fieldbus configuration error
14 Fieldbus data buffer overflow
15 Reserved
Table 1: Error handling at UNIGATE
39 Instruction manual UNIGATE
Deutschmann Automation GmbH & Co. KG
®
IC2
®
IC2
®
IC2 - Fast Ethernet V. 1.2 3.4.20