Downloading Configuration Files Using Web Interface - Radware AppDirector OnDemand Switch VL Installation And Maintenance Manual

Downloading Configuration Files Using APSolute Vision
You can download the configuration file from the platform to APSolute Vision. For more information,
see the APSolute Vision User Guide or online help.

Downloading Configuration Files Using Web Interface

If you are downloading a configuration file using Web Based Management, you cannot download to a
platform configured to use only SNMPv3.
To download a configuration file using Web interface
1. Select File > Configuration > Receive from Device. The Download Configuration File window
is displayed.
2. For AppDirector, from the Configuration Type drop-down list, select one of the following:
— Regular—You receive the configuration file.
— Peer (Active-Active)—You receive the configuration file created for the peer platform—to
support configuration synchronization in an Active-Active topology. You upload this
configuration to the peer platform. To enable the platform to create such a configuration,
you need to provide the IP address for the same interface on the peer platform for each IP
interface that you configured on this platform (Router > IP Router > Interface
Parameters > Create > Peer Address). This feature (configuration file for Active-Active
synchronization) is supported for proprietary redundancy only.
— Backup (Active-Backup)—You receive the configuration file created for the backup
platform—to support configuration synchronization in an Active-Backup topology. You
upload this configuration to the backup platform. To enable the platform to create such a
configuration, you need to provide the IP address for the same interface on the backup
platform for each IP interface that you configured on this platform (Router > IP Router >
Interface Parameters > Create > Peer Address).
3. If you want the file to include private keys, select the Include Private Keys checkbox.
4. Click Set. The Opening DeviceConfigurationFile<yyyy-MM-dd-hh-mm-ss> dialog box is
displayed.
5. Select the configuration backup to be downloaded from the drop down list and click Download.
6. Configure the file location and name as required.
7. Click OK. The file is downloaded.
Document ID: RDWR_APD_IG_1304
AppDirector Installation and Maintenance Guide
Maintenance and Upgrade
53