Radware AppDirector OnDemand Switch VL Installation And Maintenance Manual page 12

AppDirector Installation and Maintenance Guide
LINE VOLTAGE
Before connecting this instrument to the power line, make sure the voltage of the power source
matches the requirements of the instrument. Refer to the Specifications for information about the
correct power rating for the device.
48V DC-powered platforms have an input tolerance of 36-72V DC.
SPECIFICATION CHANGES
Specifications are subject to change without notice.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15B of the FCC Rules and EN55022 Class A, EN 55024; EN 61000-3-2; EN
61000-3-3; IEC 61000 4-2 to 4-6, IEC 61000 4-8 and IEC 61000-4-11For CE MARK Compliance.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user is required to correct
the interference at his own expense.
VCCI ELECTROMAGNETIC-INTERFERENCE STATEMENTS
Figure 3: Statement for Class A VCCI-certified Equipment
Translation of Statement for Class A VCCI-certified
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,
radio disturbance may occur, in which case, the user may be required to take corrective action.
Figure 4: Statement for Class B VCCI-certified Equipment
Translation of Statement for Class B VCCI-certified
This is a Class B product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a
domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
12
Equipment:
Equipment:
Document ID: RDWR_APD_IG_1304