Chapter 1 – Platforms
This chapter describes the physical platform. It includes the following topics:
•
OnDemand Switch VL, page 27
•
OnDemand Switch 1, page 28
•
OnDemand Switch 2, page 30
•
OnDemand Switch 3, page 32
•
DC Power Supply Connectors, page 34
•
The LCD Module, page 36
OnDemand Switch VL
Note:
The OnDemand Switch VL XL model is supported by AppDirector version 2.11.20 and later.
Figure 19: OnDemand Switch VL Front Panel
Table 1: OnDemand Switch VL Front Panel Connectors and Indicators
Feature
Label/Description
Power button. Pressing the button for 1 to 4 seconds causes a graceful shutdown
of the system, thus preserving system integrity. Pressing the button for more
than 4 seconds causes the hardware to power down.
Reset button. Resets the platform.
Serial RJ-45 port for out-of-band management.
Note:
console port of the platform to a console PC.
USB port for recovery and file transfer.
Six RJ-45 GbE ports for traffic or in-band management.
You can manually configure the last RJ-45 GbE port, labeled 6/MNG 1, to be a
dedicated, out-of-band management port.
•
•
Document ID: RDWR_APD_IG_1304
Radware supplies a RJ-45–to–DE-9 adapter cable to connect the
ACT—Flashing indicates activity.
LINK—Green indicates 1000 Mbit/s. Yellow indicates 10 or 100 Mbit/s.
27