Radware AppDirector OnDemand Switch VL Installation And Maintenance Manual page 37

After the platform boots, press any of the LCD buttons to access the LCD menus.
Submenu
Device Information Platform
Product
Version
MAC
Serial
Power supply
Number of CPUs
Number of cores
CPU util
CPU temp
Memory
Port statistics
1
Statistics
Settings LCD Contrast
LCD Backlight
Serial Baud Rate
Shutdown Shutdown
Reboot
1 – The LCD displays statistics per port and refreshes them every second. Thus, the
packets-in, packets-out, megabytes-in, and megabytes-out values are per second.
Document ID: RDWR_APD_IG_1304
AppDirector Installation and Maintenance Guide
Table 10: LCD Menu
Sub-submenu
Port
Port status
Pkt: in<Number>/
out<Number>K
Byt: in<Number>/
Out<Number>MB
Contrast
Backlight
Serial baud rate
Shutdown
Reboot
Remark
Platform type and version.
Product.
Version of product.
MAC address of the platform.
The serial number of the platform.
Single power supply or dual power
supply.
Number of CPUs.
Number of CPU cores.
CPU utilization in percent.
CPU temperature in Centigrade.
RAM in megabytes.
Port identifier, for example G-1.
Either up or down.
Second Out is uppercase,
Number of input and output packets
in thousands per second.
Displayed only when Port status is
up.
Amount of input and output
megabytes per second.
Displayed only when Port status is
up.
Increase or decrease LCD contrast
using the right and left arrow
buttons.
Increase or decrease LCD backlight
intensity using the right and left
arrow buttons.
The selected rate is enclosed in
asterisks, for example *19200*.
Press the down and up arrow
buttons to scroll between the
values.
Enter = Yes
Escape = No
Enter = Yes
Escape = No
Platforms
37