Figure 2-3: Sophia-Xo Power Supply Connectors And Indicators; Table 2-1: Sophia-Xo Power Supply Connectors And Indicators - Teledyne Princeton Instruments Sophia-XO System Manual

Chapter 2
Figure 2-3
power supply.

Figure 2-3: SOPHIA-XO Power Supply Connectors and Indicators

P
OWER
TO
Refer to
supply.
Table 2-1:
Power Out
Fault LED
Power LED
SOPHIA-XO Camera System
shows the connectors and indicators found on the rear of the SOPHIA-XO
REFERENCES:
Refer to Section A.3, Power
complete voltage specifications.
F
AULT
O
UT
S
OPHIA
Table 2-2 for information about each connector and indicator on the power
SOPHIA-XO Power Supply Connectors and Indicators (Sheet 1 of 2)
Label
Provides necessary power and signals to SOPHIA-XO.
This Red LED is normally extinguished.
When illuminated or flashing, this LED indicates a fault within the system has
been detected. Refer to
additional information.
When illuminated, this Green LED indicates that the power supply is turned
on.
When extinguished, the power supply is turned off.
Specifications, on page 109 for
P
LED
OWER
Description
Appendix F, Troubleshooting, on page 123 for
LED
P O
OWER N
P
OWER
17
/O
FF
I
N