Notes About This Documentation; Validity Of This Documentation; Revision History; Copyright - WAGO 750-539 Manual

WAGO-I/O-SYSTEM 750
750-539 4DO 24V DC VALVE Ex i
1

Notes about this Documentation

Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation is
included, if necessary.
1.1

Validity of this Documentation

This documentation is only applicable to the I/O module 750-539
(4DO 24V DC VALVE Ex i).
The I/O module 750-539 shall only be installed and operated according to the
instructions in this manual and in the manual for the used fieldbus
coupler/controller.
Consider power layout of the WAGO-I/O-SYSTEM 750!
In addition to these operating instructions, you will also need the manual for the
used fieldbus coupler/controller, which can be downloaded at www.wago.com.
There, you can obtain important information including information on electrical
isolation, system power and supply specifications.
1.2

Revision History

Document
Version
1.0.0
1.0.1
1.3

Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.
Manual
Version 1.0.1
Device Version
Hardware
01
01
Notes about this Documentation
Description of Change
First issue
In Section "Technical Data" output
characteristics and technical data added.
5