Tested Valves; Table 22: Tested Valves; Table 23: Valve Test Values (Date:10.2016) - WAGO 750-539 Manual

WAGO-I/O-SYSTEM 750
750-539 4DO 24V DC VALVE Ex i
6.3

Tested Valves

The I/O module 750-539 (4DO 24V DC VALVE Ex i) was tested with the
following valves.

Table 22: Tested valves

Valve designation
Festo Valve VACC-S13-K4--EX3A
Festo Valve MD-3/2-24DC-PI-IA-EX

Table 23: Valve test values (date:10.2016)

Min. tension voltage
Voltage/Current
Information
Test series for other valves pending
Other valves can also be connected to the I/O module 750-539 4DO 24V
DC VALVE Ex i as intrinsically safe actuators. Testing of these valves is
currently in progress. Based on the technical data, the following valve can
also be connected:
•
Manual
Version 1.0.1
VACC-S13-K4-EX3A
Festo Valve CPV10-EX-VI
Test value series successful
Test value series successful
Festo Valve
8.55 V / 19.7 mA
12 V / 28.3 mA
15 V / 35.7 mA
17.5 V / 41.8 mA
20 V / 48.0 mA
22 V / 52.7 mA
24 V / 57.5 mA
26 V / 62.4 mA
Connect Devices
Festo Valve
MD-3/2-24DC-PI-IA-EX
8.5 V / 2.4 mA
(after 24 sec: 6.9 mA)
12 V / 10.9 mA
15 V / 14.4 mA
17.5 V / 17.3 mA
20 V / 20.2 mA
22 V / 22.5 mA
24 V / 24.9 mA
26 V / 27.2 mA
35