Optional Plug In Pcbs - Eaton H-Max Series Manual

Dimensions & Mounting

Optional plug in PCBS

A number of plug in option cards are available. A maximum of 2 option cards may be factory installed in the control module
slots. Available options are shown in the table below.
See the option manual included with each PCB for more information.
Also see H-Max Installation manual MN04008005E for more information on control wiring, control board layout and options
PCBs.
B1 All All ALL
B2 All All ALL
B4 All All ALL
B5 All All ALL
B9 All All ALL
BF All All ALL
C4 All All ALL
See option manual included with each PCB for more information also see H-Max Installation manual MN04008005E for more
information on control wiring and control board layout and options PCBs.
Dimensions & Mounting
The IntelliPass/IntelliDisconnect physical dims are based on the Enclosure frame size. See Table to determine the enclosure
frame size based on Hp and voltage.
Weights and lifting provisions are on the dimension section and with the drawing provided with the unit
•
Attach "load-rated" hooks or shackles to lifting eyes on back panel.
•
Always maintain a maximum of 45 degrees between the lifting cables and the vertical plane.
•
Do not pass ropes or cables through the lifting eyes as sharp edges may cause excessive wear and possible failure.
•
Select or adjust rigging lengths to compensate for unequal weight distribution of the load to keep unit in the upright
•
position.
18
H-Max Series Drives IntelliPass®/IntelliDisconnect® IL04008003E April 2013 www.eaton.com
Typical Plug in Option PCB
P/N
ALL ALL 1 XMX-IO-B1-A
ALL ALL 1 XMX-IO-B2-A
ALL ALL 1 XMX-IO-B4-A
ALL ALL 1 XMX-IO-B5-A
ALL ALL 1 XMX-IO-B9-A
ALL ALL 1 XMX-IO-BF-A
ALL ALL 1 XMX-COM-C4-A
Style Number Description
3-3131-0003A I/O Expander Card, 6 DI/DO, Slot D/E
3-3131-0004A I/O Expander Card 2 x RO + Thermistor, Slot D/E
3-3131-0005A I/O Expander Card 1 x AI, 2 x AO (isolated), Slot D/E
3-3131-0006A I/O Expander Card 3 x RO, Slot D/E
3-3131-0007A I/O Expander Card 1 x RO, 5 x DI (42-240VAC), Slot D/E
3-3131-0008A I/O expander Card, 1 x AO, 1 x DO, 1 x RO, Slot D/E
3-3131-0009A LonWorks, Slot D/E