Using Instruction - Heinner HEM-1100CR Instruction Manual

www.heinner.com
V.

USING INSTRUCTION

To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with
warm water as following:
1. Pull out the water tank of the coffee maker. Pour water into water tank, the water level
should not exceed the "MAX" mark in the tank, and then insert it into the coffee maker.
2. Note: The appliance is supplied with a removable tank for easy cleaning; you can fill the
tank with water firstly, and then insert the tank into the appliance.
3. Set steel mesh into metal funnel (no coffee in steel mesh), then put the metal funnel
under the metal funnel holder (see Fig 1), and turn it anticlockwise until it is fixed tightly
(see Fig 2 and Fig 3).
4. Place an espresso cup you have prepared on drip plate. Make sure the steam knob is at
the "0" position.
5. Note: as the appliance is not equipped with any cup or jug, prepare your own jug or cup.
6. Connect into power source, press down the ON/OFF button "
power indicator (red) will be illuminated.
7. Press down the pump control button "
flowing out and close the pump by pressing the pump control button "
1100W, 50Hz, 220-240V
" to turn on the unit. The
" , it will pump water, when there is water
" again.
20