Being Used By Others; No Document Has Been Loaded; Scanning Has Been Stopped By The User - Fujitsu SP-1120N Operator's Manual

information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.

Being Used by Others

The indicators on the operator panel light up as follows.
Check Indicator
Off
The scanner is already being used.
● Make sure that another application is not using the scanner.
● Make sure that the connection method of the scanner is correct.
● Make sure that no operations are being performed on the operator panel of the scanner.

No Document Has Been Loaded

The indicators on the operator panel light up as follows.
Check Indicator
Off
No document has been loaded.
Load a document in the ADF paper chute (feeder).

Scanning Has Been Stopped by the User

The indicators on the operator panel light up as follows.
Check Indicator
Off
Scanning has been stopped by the user.
When you press the scan/stop button on the operator panel during scanning, scanning stops immediately.
If documents remain in the ADF, open the ADF and remove the documents before resuming a scan.
Power Indicator
On
Power Indicator
On
Power Indicator
On
94
Troubleshooting