Fujitsu SP-1120N Operator's Manual page 26

7
Select [Wired LAN] and connect the scanner to the computer as follows.
a
Connect the computer to a network device via a wired LAN or Wi-Fi (
For details about how to connect the computer to the network, refer to the computer manual.
b
Connect the scanner to the network device via a wired LAN (
c
Connect the power cable to the scanner and the AC outlet (
d
Turn on the scanner.
For details, refer to
8
Click the [Select a Scanner] button in the [How to Connect the Scanner] window.
The [Scanner Selection Tool] window appears.
9
Click the [Set an IP Address] button.
A message appears, prompting you to connect the scanner to the computer via the USB cable.
How to Turn the Power ON (page
26
).
).
, ).
31).
Scanner Setup