How To Load Documents - Fujitsu SP-1120N Operator's Manual

How to Load Documents

1
Pull out the chute extensions according to the length of the document.
For details, refer to
2
Lift the stacker and stacker extension according to the length of the document.
For details, refer to
3
Load the document in the ADF paper chute (feeder).
Load the document face-down in the ADF paper chute (feeder).
ATTENTION
● Remove all paper clips and staples.
● Reduce the number of documents when documents are not fed into the scanner or overlapped
documents are fed.
4
Adjust the side guides to the width of the documents.
Move the side guides so that there is no space between the side guides and the documents.
Setting Up the ADF Paper Chute (Feeder) (page
Setting Up the Stacker (page
33).
36).
49
How to Load Documents