Button Settings (For Usb Connection) - Fujitsu SP-1120N Operator's Manual

Button Settings (For USB Connection)

Specify an image scanning application to be launched when the scan/stop button is pressed.
HINT
When PaperStream Capture is installed, it is set to a computer as the default image scanning application.
The procedure when the scanner is connected via a USB cable is as follows.
1
Turn on the scanner and confirm that the scanner is connected to the computer via the USB cable.
For details about how to turn on the scanner, refer to
2
Display the [Control Panel] window.
● Windows Server 2008 R2/Windows 7
Click [Start] menu → [Control Panel].
● Windows Server 2012
Right-click the Start screen, and select [All apps] on the app bar → [Control Panel] under [Windows
System].
● Windows Server 2012 R2/Windows 8.1
Click [↓] on the lower left side of the Start screen → [Control Panel] under [Windows System].
To display [↓], move the mouse cursor.
● Windows 10/Windows Server 2016/Windows Server 2019
Click [Start] menu → [Windows System] → [Control Panel].
3
Click [View devices and printers].
The [Devices and Printers] window appears.
4
Right-click on the scanner icon, and select [Scan properties] from the displayed menu.
The properties window of the scanner appears.
5
Click the [Events] tab and check that [Scan Button] is specified for [Select an event].
How to Turn the Power ON (page
45
How to Perform a Basic Scan
31).