Fujitsu SP-1120N Operator's Manual page 40

Load the document face-down in the ADF paper chute (feeder).
For details, refer to How to Load Documents (page
3
Start an image scanning application.
4
Select a scanner driver to be used for scanning.
For some image scanning applications, selection of a scanner driver may not be needed.
5
Select the scanner to be used for scanning.
The scanner name depends on the scanner driver type and the scanner connection method. For details, refer
to the help for the scanner driver.
For some image scanning applications, selection of the scanner may not be needed.
To use the scanner connected to a network, you need to select the scanner in Scanner Selection Tool
beforehand.
Scanner Selection Tool can be started up in the following procedure.
● Windows Server 2008 R2/Windows 7
Click [Start] menu → [All Programs] → [SP Series] → [Scanner Selection Tool for SP Series].
● Windows Server 2012
Right-click the Start screen, and select [All apps] on the app bar → [Scanner Selection Tool for SP Series]
under [SP Series].
● Windows Server 2012 R2/Windows 8.1
Click [↓] on the lower left side of the Start screen and select [Scanner Selection Tool for SP Series] under
[SP Series].
To display [↓], move the mouse cursor.
● Windows 10/Windows Server 2016/Windows Server 2019
Click [Start] menu → [SP Series] → [Scanner Selection Tool for SP Series].
6
In the setup window for the scanner driver, configure the scan settings.
For some image scanning applications, the setup window for the scanner driver may not appear.
7
Scan the document with the image scanning application.
49).
40
How to Perform a Basic Scan