Confirming Property Settings - Kaba Saflok SAM RF Operation Manual

Table of Contents

SAM

RF Operations Manual

Section 3: The Site Design Process

3.8 Confirming Property Settings

The next step in the site design process is to confirm or reconfigure your property settings within the SAM

RF System. These settings include the default common access options for the unit and zone keys that

you just set up, the automatic adjustor for Daylight Saving Time, and the name and identification numbers

for your property.

1. Click on the Management menu at the top

of the window or the Management icon.

2. Point to Site Design, then select Property

Settings...

3. Click on the General tab at the top of the box. The name

of your property should already be listed in the Property

Name field. The factory will also have filled in the

Distributor Code and Customer Code fields. This

information helps to distinguish one property from another

so that keys made for your property will not open locks at

any other property and vice versa.

4. Confirm that your property's Name is correct. You can also

confirm that the Distributor Code and the Customer

Code are correct by matching them to your invoice, but

this is not absolutely necessary.

WL 12/19/2007

Table of Contents

Show Quick Links

Table of Contents