Understanding The Site Design Process - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual 38
Section 3: The Site Design Process

3.1 Understanding the Site Design Process

The site design process refers to entering information about your property into the SAM RF System. This
information generally includes the actual units and their designations (e.g., 1A, Apartment 211, Building
A, Unit 101, etc.), any common access areas such as a pool or laundry room, any zones or suites, and
more.
It is important to be accurate and thorough when entering information about your property into the SAM
RF System. The configuration of your locks and the programming of your keys are dependent upon
accurate site design information. Although it may take a considerable amount of time to perform the site
design process, changes to this information will not likely be required in the future.
Note: You may have had SAFLOK create your site design. If so, you will not need to create one.
However, to reconfigure your site design to accommodate the addition of new units or other changes to
your property locks that may impact your site design, you will need to use the following instructions.
© SAFLOK WL 12/19/2007