Programming The Locks - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 6: Locks

6.3 Programming the Locks

For the lock programming process, the utility device assigns a name or number identification and
programs the correct date and time into a lock.
Note: The utility device should never be exposed to wet conditions.
Programming Locks
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Key Encoder
and Utility Device").
2. Click on the Utilities menu at the top of
the window or the Utilities icon.
3. Click on Program Lock(s).
Note: You must keep all USB
cables connected between
the electronic key encoder
base, the utility device and the PC while the
key image spins on the PC screen.
4. Click the unit, suite, and/or common access
locks for which you wish to program. You may
select up to a maximum of 100 locks. Click OK.
Note : You must keep all USB cables connected
between the electronic key encoder base, the utility
device and the PC while the key image spins on the
PC screen. The number of lock identifications
requested will determine the length of the
downloading process time.
© SAFLOK
149
WL 12/19/2007