Creating Additional Zone Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys

5.7 Creating Additional Zone Keys

Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 5.7 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. To create additional Zone keys, click
on the Keys menu at the top of the
window or the Keys icon.
3. Point to Create, then select Zone
Key.
4. At the Create Zone Key PC dialog box, it is
important to accept (i.e., do not change) the
default setting of Duplicate Key because this
will now be a duplicate Zone key.
5. At this point, refer to the previous section to continue duplicating Zone keys until you have enough
keys to give to the appropriate number of staff members. Be sure to assign them as duplicate keys to
create a new key ID for each staff member. Be sure to also choose the appropriate zone for each
person.
© SAFLOK
105
WL 12/20/2007