Reloading Common Area Locks - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 6: Locks

6.8 Reloading Common Area Locks

Normally, when a resident moves out and takes their key with them, you would simply inhibit the key. The
Inhibit key would be used in the unit lock and all common area locks where their key had access.
However, if numerous residents move out at one time (e.g., the end of a semester at a university) it will be
faster to invalidate the resident keys in the common area locks by using the utility device to reload
common area locks. The process will put the common area locks in sync with the current authorized keys
in the database.
Important: You will still need to inhibit Resident keys at the unit doors.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Key Encoder
and Utility Device").
2. Click on the Utilities menu at the top of
the window or the Utilities icon.
3. Click on Reload Common Area Locks .
4. The screen will not prompt you to select
lock identifications as with lock
programming. It will simply download the
current information from the database.
Note : You must keep all USB cables
connected between the electronic key
encoder base, the utility device and the PC
while the key image spins on the PC screen.
© SAFLOK
161
WL 12/19/2007