Creating Latch/Unlatch Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys

5.8 Creating Latch/Unlatch Keys

The latch/unlatch key allows a common access lock to be unlatched and latched. The first time the
latch/unlatch key is used in the lock it will unlatch the lock. When a lock is unlatched, a key is not needed
to open the door. The second time the key is used, it will latch the lock. When the lock is latched, you
must use a valid key to open the lock.
Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. Click on the Keys menu at the top of
the window or the Keys icon.
3. Point to Create, then select
Latch/Unlatch Key.
4. At the Create Latch/Unlatch PC dialog box, it
is important to select the New Key option if
this will be the first latch/unlatch key you are
creating. If this is the first latch/unlatch key you
make, you will see at the top of this PC dialog
box in red letters, "No Keys Have Been Made."
© SAFLOK
106
WL 12/20/2007