Creating Inhibit Master Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys
5.11 Creating an Inhibit Master Key
If a staff member loses a key, the security risk is far more serious than when a resident loses a key
because staff members' keys are usually either Master keys or Zone keys, which provide access to more
than just a single unit.
To ensure the security of your property your residents, you must carefully reprogram all the locks that the
lost key previously opened. To reprogram these locks, you'll need either an Inhibit Master key or an
Inhibit Zone key with the ID number or numbers you wish to inhibit.
Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. Click on the Keys menu at the top of the
window or the Keys icon.
3.
Point to Create, then select Inhibit
Master Key.
4. At the Create Inhibit Master Key PC dialog box, simply
click in the box to the left of the staff member(s) whose
key(s) you wish to inhibit.
5. Name the person to whom you wish to assign the inhibit
key in the box under The Key Is Assigned To. Click the
button to the right of the box. (This button has a hand
pointing to the right.)
© SAFLOK
111
WL 12/20/2007