Creating Guard Check Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys

5.13 Creating Guard Check Keys

The Guard Check key allows your staff or security to register their patrol throughout your property. The
non-opening key is programmed to function in all of your common access locks. The key can be read
upon return from the locks. You can view and print reports of the lock names and the times the Guard
Check keys were inserted. The report will show the last 25 common access locks in which the key was
used. After a key is read, it should be erased.
Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. Click on the Keys menu at the top of the
window or the Keys icon.
3. Point to Create, then select Guard Check
Key.
4. At the Create Guard Check Key PC dialog box, you must
name the person to whom you wish to assign the key in
the box under the words, "The Key Is Assigned To."
Click the button to the right of the box. (This button has a
hand pointing to the right.)
5. At the Select User Type PC dialog box, click the open circle next to
Staff and click OK.
Note: Guard Check keys can only be assigned to staff members.
© SAFLOK
116
WL 12/20/2007