Creating Battery Check Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys

5.17 Creating Battery Check Keys

The Battery Check key is a non-opening key that is designed to check the battery voltage in the lock. If
the lock's batteries have 5.0 volts or more when the Battery Check key is used, the lock light will display
one green light. If the lock's batteries have less than 5.0, volts, the lock will display one red light. This
means you must replace the batteries in the lock. The Battery Check key never expires. It can be used on
any lock on the property.
Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. Click on the Keys menu at the top of the window
or the Keys icon.
3. Point to Create, then select Battery Check Key.
4. At the Create Battery Check Key PC dialog box, you
must name the person to whom you wish to assign the
key in the box under The Key Is Assigned To. Click the
button to the right of the box. (This button has a hand
pointing to the right.)
5. At the Select User Type PC dialog box, click the open circle next to
Staff and click OK.
Note: Battery Check keys can only be assigned to staff members.
© SAFLOK
123
WL 12/20/2007