Creating Additional Duplicate Resident/Unit Keys - Kaba Saflok SAM RF Operation Manual

®
SAM RF Operations Manual
Section 5: Keys

5.22 Creating Additional Duplicate Resident/Unit Keys

Note: The maximum number of duplicate keys is 64. After you have made 64 duplicate keys, you must
start over by making a new key for that level.
1. Be sure that the PC is turned on, the electronic key encoder device is plugged in an electrical outlet
and the USB cable between them is properly attached (see Section 2.5 "Installing the Electronic Key
Encoder and Utility Device").
Note: The utility device need not be in the electronic key encoder to create keys.
2. Click on the Keys menu at the top of
the window or the Keys icon.
3. Point to Create, then select Resident
Key.
4. At the Create Resident Key PC dialog box, it is
important to accept (i.e., do not change) the
default setting of Duplicate Key because this will
now be a duplicate resident key.
5. At this point, please reference "Resident/Unit Key
Options" and "Encoding the Resident/Unit Key"
earlier in this section to continue duplicating
resident keys until you have enough keys to give
to the appropriate number of residents. Be sure to
assign them as duplicate keys to create a new key
ID for respective residents.
© SAFLOK
134
WL 12/20/2007