Energetics CT 680 Assembly Manual page 21

Body Fat
1. In STOP mode, press the BODY FAT key to start body fat measurement.
2. Console will display UX (Drawing 19) and start measuring (Drawing 20~21).
3. During measuring, users have to hold both hands on the hand grips. When console detect the pulse,
LCD display as (Drawing 22) for 8 seconds until computer finish measuring.
4. LCD will display BMI (Drawing 23), FAT % (Drawing 24) and BODY FAT advice symbol (Drawing 25).
5. Error message:
Drawing 19
Drawing 21
Drawing 23
Drawing 25
Noted:
1. After 4 minutes without pedaling or pulse input, console will enter into power saving mode. Press
any key may wake the console up.
2. When computer act abnormal, please plug out the adaptor and plug in again.
*The LCD displays "---- ", " ----"–means not hand the grip correctly.
*E-1–There is no heart rate signal input detected.
*E-4–Occurs when FAT% and BMI result is below 5 or exceeds 50.
Drawing 20
Drawing 22
Drawing 24
21