Codes And Standards; Certifications - WEG CFW701 User Manual

8.3 CODES AND STANDARDS

SAFETY
„
STANDARDS
„
„
„
„
„
„
ELECTROMAGNETIC
„
COMPATIBILITY
(EMC)
„
„
„
„
„
„
MECHANICAL
„
STANDARDS
„

8.4 CERTIFICATIONS

Certifications
(*)
UL and cUL E184430
CE
IRAM
C-Tick
EAC
Functional Safety STO Funtion, with certificate issued by TÜV Rheinland.
(*) For updated information on certifications, please contact WEG.
Table 8.2: Codes and Standards
UL 508C - Power conversion equipment.
Note: Suitable for Installation in a compartment handling conditioned air.
UL 840 - Insulation coordination including clearances and creepage distances
for electrical equipment.
EN61800-5-1 - Safety requirements electrical, thermal and energy.
EN 50178 - Electronic equipment for use in power installations.
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1:
General requirements.
Note: The final assembler of the machine is responsible for installing an safety
stop device and a supply disconnecting device.
EN 60146 (IEC 146) - Semiconductor converters.
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General
requirements - Rating specifications for low voltage adjustable frequency AC
power drive systems.
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC
product standard including specific test methods.
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment
– Electromagnetic disturbance characteristics - Limits and methods of
measurement.
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 2: Electrostatic discharge immunity test.
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 3: Radiated, radio-frequency, electromagnetic
field immunity test.
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 4: Electrical fast transient/burst immunity
test.
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 5: Surge immunity test.
EN 61000-4-6 - Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 6: Immunity to conducted disturbances,
induced by radio-frequency fields.
EN 60529 - Degrees of protection provided by enclosures (IP code).
UL 50 - Enclosures for electrical equipment.
Technical Specifications
Notes
CFW701 | 43