Bosch Rexroth IndraControl S67 Application Description page 49

DOK-CONTRL-S67DO8M12HS-AP02-EN-P
Rexroth IndraControl S67 Digital Module High Speed 8 Outputs – 0.1 A (4×M12)
Position LED Color/status
16 F Red
17 I/O Yellow
Red
Position LED Color/status
18 U Green
A
Off
19 U Green
LS
Off
Cause
At least one global
diagnostic message was reported
at the module
Output signal active
Error at output
Tab. 10-2: Operational message 2
Cause
Actuator supply U
Actuator supply U
Logic supply and sensor supply U
available
Logic supply and sensor supply U
not available
Tab. 10-3: Operational message 3
Bosch Rexroth AG
Diagnostics via LED Signals
Remedy/Information
Check the supply voltages U
U of the upstream IndraControl
A
S67 components
–
Check the actuator connection for
short circuits or overload
Remedy/Information
available –
A
not available Connect the supply voltage and
A
check the voltage level, if applica‐
ble.
–
LS
Connect the supply voltage and
LS
check the voltage level, if applica‐
ble.
47/61
and
LS