Advertisement
Troubleshooting
3) Unload auger has abnormal vibration.
A) Ensure the hydraulic fold cylinder is extended to the full stroke position. This is needed in order to
lock the two halves together.
B) May require the clevis on the high end of the hydraulic cylinder to be adjusted to ensure the system is
being locked when the cylinder is in the full stroke position.
C) Ensure the drive train tensioner has been properly adjusted to take the slack out of the chain.
D) If the vibration does not stop, call Balzer's Service Department at 1-800-795-8551 Extension 134 or
0 for the operator.
"Grain Door Timing" The front half should be further open than rear half. In
NOTE
most cases, each time the grain doors are closed, they will re-open evenly. If this
is not occurring and is considered a problem contact Blazer for information and
help solving the situation.
4) Trouble backing up with steering wheels going in the wrong direction (Note: This may occur in
extreme conditions such as mud, ice and/or snow.)
A) Make sure control block is supplied with oil.
B) System is still not steering properly, call Balzer's Service Department at 1-800-795-8551 Extension
134 or 0 for the operator.
71
Advertisement
