Advertisement
Lubrication & Maintenance
CROSS & BEARING
GREASE POINT
LUBRICATE ALL FITTINGS WITH A GOOD QUALITY LITHIUM SOAP BASE E.P. GREASE
MEETING THE N.L.G.I. #2 SPECIFICATIONS AND CONTAINING NO MORE THAN 1%
MOLYBDENUM DISULFIDE. (EX. SHELL SUPER DUTY OR EQUIVALENT)
AN E.P. GREASE MEETING THE N.L.G. I. #2 SPECIFICATIONS AND CONTAINING 3%
MOLYBDENUM DISULFIDE MAY BE SUBSTITUTED IN THE TELESCOPING MEMBERS
ONLY. (EX. MOBIL OIL COMPANY, "MOBILE GREASE COMPANY", SHELL OIL COMPANY,
"RETINAX AM", TEXACO, "MOLYTEX EP #0 AND #2.)
INTERVAL
2 HRS.**
2 HRS.**
CAUTION!! REPLACEMENT PARTS ARE NOT LUBRICATED
REPLACEMENT PARTS MUST BE LUBRICATED AT TIME OF ASSEMBLY. USE AMOUNT
LISTED ABOVE PER LOCATION THEN FOLLOW LUBE RECOMMENDATIONS ABOVE FOR
LUBRICATING INTERVALS.
PTO Lubrication Specification
TELESCOPING MEMBERS
GREASE POINT
GREASE RECOMMENDATIONS
LOCATIONS
CROSS & BEARINGS
TELESCOPING MEMBERS
53
CROSS & BEARING
GREASE POINT
AMOUNT
1 PUMP
4-8 PUMPS
Advertisement
