Advertisement
Operation
Suspension Height Adjustment
1. Position tractor and machine on level ground.
2. With a grain cart having a control valve block or other, connect the two power hoses to a tractor
valve bank.
3. Engage steering lock or Straight Steer function.
4. Open Left Hand Base End ball valve and Common Rod End ball valve slowly and simultaneously.
5. The cylinders can be filled by opening the valves a little, not all the way. This will provide more
control while filling cylinders.
6. Raise unit until there is 7" of the left hand center hydraulic cylinder rod showing. (Close Valve)
7. Open Right Hand Base End ball valve and common Rod End ball valve slowly and simultaneously.
8. The cylinders can be filled by opening the valves a little, not all the way. This will provide more
control while filling cylinders.
9. Raise unit till there is 7" of the right hand center hydraulic cylinder rod showing. (Close Valve)
The unit is now ready for operation.
To lower the unit open all valves and disengage the Steering lock function.
NOTE
Independent Cross Axle Suspension
34
Advertisement
