Advertisement
Lubrication & Maintenance
CAUTION
Vertical Auger
Five (5) grease fittings are located on the auger folding
hinge. These should be greased every day. Pump grease
until old grease is visible.
Apply never seize to shaft that goes through pillow
block bearing once every 40 hours.
The bearing located at the end of the vertical auger
should get 1 to 2 careful pumps of grease every day
of constant use.
Apply grease to fitting located on the bottom end of
auger folding cylinder. This should be greased every
day. Pump grease until old grease is visible.
Excessive pressure while applying grease can be harmful to the
66
Advertisement
