Advertisement
Lubrication & Maintenance
The bearing located at the rear end of the hori-
zontal auger should get 1 to 2 careful pumps of
grease every 2 days of constant use.
The bearing at the front end of the horizontal
auger has a grease line and fitting that
permits greasing externally. This location
should get 1 to 2 careful pumps of grease
every day of constant use.
The bearing at the bottom end of the vertical
auger has a grease line and fitting that permits
greasing externally. This location should get
1 to 2 careful pumps of grease every day of
constant use.
CAUTION
Horizontal Auger
Excessive pressure while applying grease can be harmful to the
bearing seals.
65
Advertisement
