Advertisement
Lubrication & Maintenance
Fill oiler reservoir with chain oil. See Oiler Viscosity Chart below. Remove clear oiler hoses from
brushes by depressing retainer clips and pulling on hoses. Press trigger for auger clutch and check for oil
flow at the brushes. Make sure to have hoses pointed away from your body. Wait two to three
seconds and repeat until oil flow is present.
5/8"
Oiler Viscosity Chart
Temperature Range
20-40⁰ F
40-100⁰ F
100-120⁰ F
120-140⁰ F
Automatic Chain Oiler
Oil Viscosity
SAE 20
SAE 30
SAE 40
SAE 50
64
Remove Oiler Hoses
to view oil flow
Advertisement
