Advertisement
Operation
Never operate this machine if shields are missing or if persons are in or on this machine.
Do not leave tractor seat.
Keep everyone away while operating this machine.
Operate all hydraulic controls to become familiar with the function of each tractor lever and to
visually see that the unit is responding correctly.
Engage PTO SLOWLY with tractor throttle at slow idle. Use maximum modulation on tractor PTO
control.
Watch and listen to confirm that the grain cart is operating properly. Run at fast idle for 5 minutes
disengage PTO and shut off tractor engine and remove keys from ignition. Make all adjustments
before any further operating is attempted.
Make mental and/or physical notes concerning which way to move the lever to
NOTE
get the desired result.
Always close grain doors before disengaging PTO.
Always engage PTO and cross auger clutch before opening grain doors.
Be sure grain doors are closed before loading.
Always engage steering lock-out cylinders before attempting to back up this grain cart.
Always engage steering lock-out cylinders when driving down roads.
Always disengage steering lock-out cylinders when working in the field.
Always load grain cart evenly front to back to avoid excessive tongue weight.
WARNING
Initial Start Up
In Field Procedure
Torque lug nuts to 420 ft/lbs. Tighten lug nuts before each day's
use for the first 5 days.
30
Advertisement
