Software Specifications - YOKOGAWA Sushi Sensor XS770A User Manual

Canadian Safety Standards:
CAN/CSA-C22.2 No.61010-1
CSA-C22.2 No.94.2
IEC 60529
Degrees of protection:
[Housing material Code: 1] IP66/IP67
[Housing material Code: 2] IP66/IP67 and Type 4X
PHYSICAL SPECIFICATION
n
Housing Material:
For detail, refer to "MODEL AND SUFFIX CODES."
Weight:
260 g (0.57 lb)
Mounting:
Mounting on the measurement target using the screw *
*: Can also be mount using the magnetic holder supplied as an accessory. Note that, when using the magnetic holder, the vibration
measurement frequency band drops.
9.2 Software Specifications
SUSHI SENSOR APP
n
This software is used to perform the setting and status check of this product via the NFC
interface.
Operating Environment:
Item Recommended System Requirements
OS Android 5.1.1 or higher
CPU Snapdragon 800 or equivalent or higher
Resolution 1280x720 dots or more
NFC Reader, writer
GPS Optional
Note of Available Android Device:
When using Sushi Sensor App for ATEX intrinsically safe explosion devices, the Android device
must comply with the following.
• When using an NFC link in a non-hazardous area, the maximum magnetic field strength
generated by the Android device is 18 A/m (r.m.s.) or less (Compliant with ISO / IEC 14443).
• When using an NFC link in a hazardous area, only an Android device confirmed by
Yokogawa Electric Corporation can be used.
• If additional information and approvals for Android devices are required, contact a
Yokogawa representative.
<9. Specifications>
IM 01W06E01-11EN
65