7.
XS770A Sending Data
This section describes the data sent by XS770A.
XS770A sends data according to the format described in Table 7-1.
The Data_Type field shows the formats of the sending data. The sending period varies
depending on Data_Type.
Table 7-1
Parameter Name
Data_Type
Data
Table 7-2
0x10 Sushi Sensor vibration (Z-axis)
0x11 Sushi Sensor vibration (XYZ composite axes)
0x12 Sushi Sensor vibration (X-axis)
0x13 Sushi Sensor vibration (Y-axis)
0x42 Initialization information (INI)
0x43 GPS information
0x40 Health report information (HRI)
0x41 Self-diagnosis information (DIAG)
7.1
Sushi Sensor Vibration (Z-axis)
Data_Type=0x10
Table 7-3
Parameter Name
Data_Type
Data_Status
PV_Acceleration
PV_Velocity
PV_Temperature
Sending data format
Size (Byte)
1
Variable length
Data_Type and sending period
Data_Type
Sushi Sensor vibration (Z-axis) data format
Type
Size (Byte)
UINT8
UINT16
FLOAT16
FLOAT16
FLOAT16
<7. XS770A Sending Data>
0x10 Sushi Sensor vibration (Z-axis)
0x11 Sushi Sensor vibration (XYZ composite axes)
0x12 Sushi Sensor vibration (X-axis)
0x13 Sushi Sensor vibration (Y-axis)
0x40 Health report information (HRI)
0x41 Self-diagnosis information (DIAG)
0x42 Initialization information (INI)
0x43 GPS information (GPS)
Varies depending on Data_Type.
Depends on the sensor setting
Transmit data after joining the network, and every
hour after the connection, up to three times.
Once every 24 hours
1
0x10
2
Shows the status of the measured value.
All 0: Good
Bit15: Acceleration error
Bit14: Velocity error
Bit13: Temperature error
Bit12: Acceleration overrange
Bit11: Velocity overrange
Bit10: Temperature overrange
Bit9: (Reserved)
Bit8: Simulation mode
Bit0 to 7: (Reserved)
2
Z-axis acceleration peak value (m/s
2
Z-axis velocity RMS value (mm/s)
2
Temperature measured value (°C)
Description
Sending period
Description
)
2
IM 01W06E01-11EN
43