Genral Specifications; Model Fd30 Immersion Fitting - YOKOGAWA FD30 Instruction Manual

4
All defective goods need to be sent to the service of the sales organization for repair or
replacement and the returned material should be accompanied by a letter of transmittal,
which should include the following information:
• Part number, Model code and Serial number
• Date and number of sales order
• Length of time of service and type of service
• Description of the faulty operation of the device and the circumstances of the failure
• Pressure, temperature, process composition and all other process conditions or
environmental circumstances which are related to the installation and possibly failure of the
device
• Statement as to whether warranty or non-warranty service is requested
• Complete shipping and billing instructions for return of material and name, phone number
of contact person that can be approached for further information.
The returned goods that have been in contact with process fluids must be detoxified and
disinfected prior to shipment for the health and safety of our employees. Material Safety
Data sheets must be included for all components of the processes in which the sensors/
fittings have been used. The shipping address where to the goods have to be returned is
specified on the original sales order or on the back page of this manual.
4. General specifications

4.1 Model FD30 Immersion Fitting

Wetted materials
- Body & flange
- O-rings
- Blanking plug
- Conductive bushing
Temperature
- Minimum
- Maximum
Pressure
Immersion length
Weight
- Without flange
- With flange
Options
- Sensor/cable
- Flexible conduit
Option /PH5
Option /PH10
- Jet cleaner (Option /JC)
- Mounting set (Option /MS1)
IM 12J06K04-E-E
: Polyvinylchloride (PVC)
: Silicone rubber
: Ryton R4 (remove before use!)
: Brass
: -10 °C
: +50 °C
: 2 bar max.
: 0.5 to 2.0 m (10 cm steps) When ordered as a
subassembly (pipe length 00), a tube with PVC
cement will be delivered with the holder
: 1.35 kg + 0.2 kg per 0.5 meter
: 0.5 kg extra
: See DO30G
: PVC and Nylon
: 5 meter protection hose
: 10 meter protection hose
: Materials: PVC, Nylon, PVDF and PTFE
Temperature: as FD30
Pressure: as FD30
Immersion length: nominal + 4 cm
: Material; Galvanized steel