CAUTION
• Tighten the screw and use the proper tool for all operations, and ensure that the tool is
applied to the Base (metallic part).
• Install XS770A with extremely careful not to injure your hand or finger.
• Note that, when installing XS770A using the magnetic holder, the vibration measurement
frequency band drops.
• In case the earthing of the Base (metallic part of the enclosure) is not ensured by
installation, use the screw at the side of the Base for bonding the Base to the earth point or
the equipotential bonding system.
<3. Installation>
IM 01W06E01-11EN
8