Import Network Information - YOKOGAWA Sushi Sensor XS770A User Manual

4.3

Import Network Information

Network information is required for configuring network for XS770A. The same information
must be specified for both of XS770A and LoRaWAN gateway to be connected. This subsection
explains "Import network information to Sushi Sensor App" in Figure 4-2. "Write network
information to XS770A" is explained in section 5.
Configure the network information
to gateway
Configure the network information
to LoRaWAN gateway
(Refer to "TI 01W06A51-01")
*1: Network ID is defined as App EUI in LoRaWAN specification. It represents the Application identifier to which Sushi Sensor is connected.
*2: Encryption key is defined as App Key in LoRaWAN specification.
Figure 4-3
To import network information to Sushi Sensor App, there are two ways to import the key: "Use a
key card" and "Use Support server".
Determine the following network information
• Gateway tag name
• Network ID* 1
• Encryption key*
Configure the network
information to Support server
Use Support server
(Refer to "TI 01W06A51-01")
Distribution of Network Information
<4. Sushi Sensor App>
2
Configure the network information
to XS770A
Import the network information to
Sushi Sensor App
(Refer to subsection 4.3)
Configure the network information to
XS770A
(Refer to section 5)
Write the network information to a
key card
Use a key card
(Refer to "TI 01W06A51-41")
F040301.ai
IM 01W06E01-11EN
11