Firmware Update - YOKOGAWA Sushi Sensor XS770A User Manual

Transportation of products containing a lithium battery:
This product contains a lithium battery. When transporting this product with the battery installed,
set this product to OFF mode to prevent the battery from draining. For the procedure to enable
OFF mode, refer to Section 6.9. Transportation of primary lithium batteries is restricted by
regulations issued by the U.S. Department of Transportation, the International Air Transport
Association (IATA), the International Civil Aviation Organization (ICAO), and the European
Ground Transportation of Dangerous Goods (ARD). It is the responsibility of the shipper to
ensure compliance with these and any other local requirements. Consult current regulations and
requirements before shipping.
6.8

Firmware Update

The XS770A firmware can be updated by using Sushi Sensor App. A new version of the XS770A
firmware is provided through Sushi Sensor App.
IMPORTANT
It takes a few minutes to upgrade the firmware. Before upgrading the firmware, the Android
device should set so that it does not enter sleep mode. If the Android device enters sleep mode
during the update process, the firmware updating fails.
(1) Check the current firmware version.
(1)-1 On the start screen of the Sushi Sensor App, press [Firmware Update] button.
(1)-2 Move the Android device closer to XS770A.
Check current firmware version.
(1)-1
Figure 6-9
(1)-2
Check Current Firmware Version
<6. Operation and Maintenance>
F060801.ai
39
IM 01W06E01-11EN