YOKOGAWA Sushi Sensor XS770A User Manual page 38

A:In the case of the sensor is not registered in the list
(1)-A-1 Follow the procedure in Section 5.6, restore setting information the XS770A to be
replaced from the Support server or PC.
Display the <Sensor Setting> screen (refer to Table 5-5).
B:In the case of the sensor has been registered in the list
(1)-B-1 After selecting the sensor, <Sensor Setting> screen appears.
Display the <Sensor Setting> screen (refer to Table 5-5).
(1)-A-1, (1)-B-1
Figure 6-4 Display The General Setting Screen
(2) Write setting information to the new XS770A.
(2)-1 Prepare a new XS770A.
(2)-2 Follow the procedure in Section5.2, write setting information to the new XS770A.
The warning message appears because the network ID is different, but press [Done]
button.
(2)-3 Follow the procedure in Section5.1, configure the network for the new XS770A.
When the network configuration is completed, the new XS770A connects to the gateway.
(2)-2
Figure 6-5 Write Setting to New XS770A
F060602.ai
F060603.ai
<6. Operation and Maintenance>
35
IM 01W06E01-11EN